Vestur Austur s.r.o.

OUR PRODUCTS:

SAFETIS EX-proof

detect flare-ups before the fire starts

SAFETIS EX-proof is specially designed for the rapid detection of flare-up risks. This camera responds to rising temperatures without seeing any flames. One of the components of Workswell’s SAFETIS system, the EX-proof is built to withstand demanding outdoor applications.

{fslinktext1}{fslinktext2}

False

Early fire detection
High Durability

Realtime monitoring
Temp. measurement

IP67 COVERAGE + MECHANICAL DURABILITY

The EX-proof’s robust case ensures the protection of this highly sensitive thermal camera in corrosive environments.The camera itself is fully radiometric, and it comes in two resolutions: 336×256 pixels and 640×512 pixels. In addition, three image frequencies are on offer: 9 Hz, 30 Hz, and 60 Hz.

High temperature sensitivity

As a fully radiometric thermal camera, the SAFETIS EX-proof automatically detects the risk of fires before any flames have broken out. That’s because it was designed to be highly sensitive to changes in surface temperature – in fact, its sensitivity is better than 50mK.

Surface temperature data is critical for any fire prevention system because temperature trends are the primary basis for flare-up risk detection. Due to the SAFETIS EX-proof’s high temperature sensitivity, the system records even minimal temperature changes. Furthermore, the SAFETIS EX-proof’s control unit eliminates many of the false alarms that are common in fire prevention systems. This makes it an ideal fire prevention solution.

SAFETIS system components

{fslinktext1}{fslinktext2}

False

The following thermal cameras are included in the SAFETIS system:

SAFETIS Outdoor – advanced protection for outdoor applications
SAFETIS Indoor – optimized for indoor use
SAFETIS Outdoor Pan-Tilt – advanced protection and extensive IP 67 coverage, plus a PTZ positioning system

The SAFETIS system also features two very special thermal cameras. First, there’s the SAFETIS Stainless Steel. Ensconced in a protective cover that preserves system integrity in industrial environments with highly corrosive substances, this camera is also ideal wherever aluminum is prohibited. It offers a high level of coverage in demanding outdoor settings.

Next comes the SAFETIS EX-proof, which is clothed in a specially modified shield that is specially designed for areas that have a high risk of explosion. The EX-proof is ATEX certified and meets the strictest safety standards.

Built-in webserver

Each SAFETIS thermal camera connects through a built-in web-server. The server provides a basic image stream as well as a suite of tools for advanced configuration and parameter setting.

The multi-camera SAFETIS system can be connected through the SAFETIS Control Unit. This unit enables the interconnection of up to 16 SAFETIS thermal cameras within any construction. Cameras can be configured from this central unit. More information about the central unit can be found on the separate product page for the SAFETIS Control Unit.

{fslinktext1}{fslinktext2}

False

Wide range of lenses

To make it easier for users to modify their thermal camera for each new application, the SAFETIS Indoor comes with four lenses. These lenses offer fields of view of 69°x56°, 45°x37° and 32°x26° for the 640×512 px version, and 45°x35°, 35°x27°, 25°x19° a 17°x13° for the 336×256 px version. Depending on the lens used, the camera can be configured to monitor distant objects as well as larger areas that are close at hand, such as warehouses.

The size of the recorded area can always be verified with the FOV calculator.

DIGITAL OUTPUTs + TEMPERATURE RANGE

In the event of an alarm, the SAFETIS thermal camera alerts the master system through one of seven digital outputs. Individual outputs can be assigned to various events, areas, and types of alarms.

SAFETIS thermal cameras come with two temperature ranges: -25 °C to 150 °C (-13 °F to 302 °F) and -40 °C to +550 °C (-40 °F to 1022 °F). With an external filter, these ranges can be modified to span from +50 °C to 1,000 °C (+122 °F to 1832 °F) or +400 °C to 1,500 °C (+752 °F to 2732 °F)

Typical applications

The SAFETIS system is currently monitoring a wide variety of operations, including:

{fslinktext1}{fslinktext2}

False

Industrial warehouses
Ammunition warehouses
Coal warehouses and conveyors
Power plants and electric energy distribution systems
Agricultural warehouses and food warehouses
ATEX environment
Depots and incineration plants and hazardous waste warehouses
Conveyor belts
Chemical and industrial plants
Cement plants
Monitoring of perimeters

SDK for custom application development

An SDK for integrating thermal camera into your devices is available. SAFETIS Ethernet SDK is a set of commands, intended to control the SAFETIS camera over the Ethernet connection without the need of a web browser. These commands are compatible with all models of the SAFETIS cameraunless stated otherwise.

The SAFETIS runs a TCP/IP server for the control. The opened server is similar to telnet protocol and can be usedwith telnet terminal software.

Safetis thermal cameras deliver rapid fire detection

SAFETIS thermal cameras operate on a simple principle: they detect fires through continuous temperature measurement. These cameras are equipped with custom-built algorithms that deliver advanced analyses of temperature trends. As a result, SAFETIS systems can alert operators to the mere risk of a flare-up, well before any fire has broken out. These cameras also eliminate false alarms by providing comprehensive thermal data for the recorded scene. The result is a highly accurate system that enables effective fire control by raising an alarm before smoke detectors and CCTV cameras have a chance to respond.

Three phases of fire detection

1. Gradual Heating

What happens right before a fire starts? While there may be no flame,
a thermal camera can still see that something’s amiss. That’s because
temperatures must rise for any material to combust. Even though smoke
detectors won’t respond, the SAFETIS system will react.

{fslinktext1}{fslinktext2}

False

2. Smoke Generation

Smoke follows heat, so phase two of any fire is visible to the naked
eye – and to a smoke detector. However, once smoke rises, the risk of
rapid combustion is very high. A reaction in phase two may be too late.

3. Flare-up

In this final phase, both fire and smoke are clearly evident. Today,
both CCTV cameras and smoke detectors alert operators to flare-ups, but
their alarms often come too late to avert the loss of life and property.
That’s why the SAFETIS was designed to give safety pros a fighting
chance at stopping a fire.

Technical information documents

Souvisejicí soubory